Shenzhen MOCO Interconnect Co., Ltd.
Shenzhen MOCO Interconnect Co., Ltd.
Add to Cart
EXG elbow socket for printed circuit 1B 8 pin push pull circular connector
Main features:
- Security of the push-pull self-latching system;
- Solder or print contacts(straight or elbow);
- Keying system for connector alignment;
- 360°screening for full EMC shielding;
Description
Z12 socket is a elbow ( 90°) socket for printed circuit with two nuts. You can pick the right size you want according to your panel cut-outs and other parameters. Z12 socket widely used in many area like medical, audio - video and so on.
Dimensions and Parameters
| MOCO P / N | 1BZ12G08HLA |
| Insert | 8 low voltage |
| Configuration | Brass (gold plated) |
| Insulator | PPS |
| Endurance (Shell) | 5000 mating cycles |
| Temp (min) | -40 deg |
| Temp (max) | 200 deg C |
| Humidity (max) | <=95% [at 60 deg C / 140 F] |
| Vibration | 15 g [10 Hz - 2000 Hz] |
| Shock Resistance | 100 g [ 6 ms] |
| Salt Spray Corrosion | >144 hr |
| IP Rating | 50 |
| Shielding (min) | 75 dB (10 MHz) |
| P op (max) | 60 bar (870 psi) |
We also provide cable assembly service!
If you have any interests, please feel free to contact us!
Contact us today, we are looking forward to serving you!